Care Guide

The first thing to do is use a properly shaped coat hanger. Leather clothes should be kept in air-conditioned places or wardrobes and not be thrown out in the back of the cupboard except if you prefer that style that is, in fact, very stylish and if interested, we offer several fashionable biker looks that you could roll up into an elongated ball and put away to ensure that the full effect of the crease remains. The second point to remember is to not store or keep the sheepskin or leather garments close to any direct heat source, like a radiator, boiler, fire or hot water tanks (airing cupboard), AGA and Rayburn or under direct sunlight for prolonged durations. Keep in mind that heat sources with high temperatures can dry out and alter the colour of sheepskin and leather, and this is the case with natural woods and various other natural materials. A coat or jacket in a day will keep the fabric the same since it is the natural environment in which it developed and is ideal for the outdoors. The problem arises when the power and heat of direct sunlight are amplified by a glass-based window and focused on a narrow focus portion of the clothing over long periods.

Sealed nappa can withstand just a brief and light shower. Cowhide is much denser (consequently heavier and less soft) and less permeable to water. The only exterior clothes suitable for rainy weather are rainproof coats like trench coats or Mackintoshes, constructed from extremely tightly woven fabrics that block waxed raincoats and waterproof jackets. The leather is not advised to be submerged in rain or water. In the event of this happening, the leather must be able to dry out naturally in a ventilated room. Do not try to put it in the radiator, boiler, or water tank, which are similar items, nor put it close to a burning fire to accelerate the process. The heat will only cause the leather, and it will then become difficult to re-soften it to how it was before the heat attack. Patience is crucial here as I spilt half a litre of water inside my stunning Nappa leather handbag, which took three days to dry. I then had the white watermark indicating the height at which the liquid could rise inside the purse. I then used the Letap cleanser, and the mark faded after several applications; however, I continued carrying the bag. Suppose the suede or nubuck becomes completely soaked. In that case, an entirely new sponge or extremely gentle clothes brush might be the best way to restore the nap’s outer layer but do not overload the brush because this can make the nap look unevenly worn, and some of us may prefer this worn-out look.

Products for leather care are available to improve the time rain droplets take to soak into the hide’s surface. More information is available below. You can also browse the leather care products in the Women’s and Men’s ranges.

They typically have sealed surfaces that prevent the ingress of moisture and particles. As a result, they are the easiest to maintain, with buffalo and cowhide being the most durable. In general, dark brown and black cowhide and Nappa don’t reveal marks easily and are fairly simple to maintain. Specialized cleaning products for leather are suitable for sealed nappa buffalo and cow hides. Be sure to test the product on a small surface first; we are not liable for the manufacturer’s formulation.

Creams for leather are typically inappropriate for aniline leather because they are natural leather surfaces. Aniline leather is made from high-quality lamb skins and is treated with washing to give it a soft, silky texture. Leathers made from aniline usually possess a more matte texture. Aniline leather will age by adding character. Leather with aniline is ideal for creating a classy and cool appearance with a soft vintage feel that is antiqued. Certain protective sprays can be applied on leathers with darker hues like black, brown and purple. They can also be used on aubergine. Be sure to apply the spray thoroughly. The protector spray can make the shade darker on lighter tan shades, so be mindful and apply the spray evenly (i.e., don’t over-spray or spray in patches).

The two leathers have a distinctive brushed matt finish. Its surface leather is milled to create a short nap similar to velvet or an even matt nap. Nubuck is extremely soft and comparable to velvet. Suede has a larger, chunkier nap that creates shorter, fat hair-like structures, similar to rougher velvet.

When it comes to caring for your suede, nubuck or brushed leather piece, we have these tips:

• It is best to use dry and clean fingertips when you handle.
• If you are trapped in the rain, the suede nubuck will be fine even in a gentle rain shower for a brief period. It is advised to allow your coat’s natural drying process and avoid putting it on radiators or heaters. If rain is forecast to continue to pour, be expected, it is recommended not to expose the coat, if feasible; however, if you do get caught, you should allow the coat to be naturally dried in an air-conditioned and warm space. However, avoid exposing the coat to direct heating sources. A light and top-quality soft clothes brush might be required when the coat is completely dried.
• Soft cleaning sponges are suitable when marks are visible. However, they should be handled carefully since they could cause abrasions and make them look worse. Light brushing with an excellent soft bristle clothes brush may be used to minimize or eliminate marks.
• Wire brushes are not recommended because they can be extremely abrasive and can damage suede and nubuck.
• High-quality suede and nubuck protectors can be utilized. Our experience with protectors shows that you should apply them regularly to ensure that they are protected.
• The suede and nubuck should keep their charm and style for a few years. The best way to store the clothing is in a cool, well-ventilated room or area, away from heaters and radiators.

There are four major finishes for lambskins and sheepskins in the following order:

• Suede is a natural finish that has a coarser nap
• Nubuck – a natural finish, extremely fine and soft nap
• Semi-sealed nubuck offers an extremely low resistance to a light rain shower.
• Nappa has a soft, sealed leather finish.

If you are trapped in the rain, the factory finish can reduce water absorption in a short, light shower. If you’re caught in a shower, shake the coat or jacket vigorously to eliminate the accumulated water on the surface. Do not dry the coat on an appliance like a radiator, heat source, fan heater, or near the fire. Place the jacket or coat on a suitable coat hanger (i.e. large and shaped) or lay the jacket open with the outer surface visible to the space, preferably on a heavily cushioned sofa or armchair. Be sure not to put the jacket or coat on the edge of a narrowly shaped piece that could squish the garment’s form during rest. Then, allow it to dry at normal temperatures at room temperature. When the coat, jacket, or gilet (waistcoat) is dry, use a soft cloth brush or a dry sponge to clean off any remaining rain spots.

If you are caught in heavy rain, take the jacket out and put the wool fur on the outside since it is designed by nature to withstand the rain (this is the initial exterior wool layer of the animal’s fur). But keep in mind that sheep continuously produce lanolin oil, which coats their wool and helps keep water out, and the sheepskin cannot replenish this.

Small grease marks can be removed by dusting the suede surface with chalk powder. For stains that are more difficult to remove, dry cleaning services could be required.

Sheepskin is a natural material, and it’s normal for it to shed small particles after it is new. Do not worry; excessive shedding can be controlled by gently brushing the surface using a soft cloth brush that isn’t too rough. An upholstery brush that is soft and clean attached to the vacuum cleaner could be used to clean any wool shavings left on a tailor’s cutting table.

Like all natural materials like genuine sheepskin and even leather, there is always a variation between skins and even within one skin (i.e. same skin). These are distinctive marks that are not present on synthetic substitutes made synthetically.

To limit the ingress of liquid droplets like rain or surface marks, you could opt to put on the spray guard protector (these are made from similar treatment methods to the skin). But please make sure you review the directions before using them. Make sure you test the product in a hidden location and ensure an extremely steady spray method; it is vital that they can be thoroughly shaken before each spray because this ensures the spray is in a fine mist and prevents large droplets of spray. Large spray droplets usually occur because there’s not enough pressure in the container to keep an even mist. When using an adsorbent guard, lighter colours are a little shade darker. This is why it’s crucial to cover the entire area and maintain a clean spray from the bottle in every horizontal stroke. It is beneficial to spray only one side of the clothing at a time, i.e., the back or front panel, with only one side exposed to the sprayer. When spraying with smooth, steady horizontal strokes, it is possible to use the. Good care for your clothes will ultimately reward you with an extended life span; however, depending on the level of care, from time to time, your garment may require dry cleaning with a professional dry cleaning service.

The information above is a common-sense method for caring for your sheepskin or lambskin clothing. This is a non-cost guide. Mens Leather Jacket UK does not accept any responsibility for the use of its contents or its interpretation. The above information is based upon guidelines issued by the producers or on fine-quality lambskin and sheepskin clothing that have been passed down through many years.